Download Synaptics Pointing Device Driver Windows 10 Install Update
How does HP install software and gather data? Opening the Touchpad Settings. Button clicking using a TouchPad. Scrolling using a ClickPad. Navigating using multi-finger gestures. Adjusting TouchPad or ClickPad pointing sensitivities. Turning all ClickPad gestures off and on.
Troubleshooting when TouchPad does not work. Opening the Mouse properties. Updating the driver through Windows Update. This document pertains to HP notebooks using Windows A TouchPad or ClickPad is a pointing device with a touch-sensitive surface located on the palm rest of the notebook. On some notebooks, the right side of the TouchPad has a vertical line that indicates a scroll function. Additionally, two or more buttons that function as left and right buttons on a conventional mouse pointing device usually accompany the TouchPad.
On ClickPads, taping the lower left or lower right corners functions as left or right buttons on a conventional mouse pointing device. Depending on your hardware and version of Windows 10, and some graphics and information in this document might vary slightly. Because Touchpads and Clickpads are very similar the instructions and graphics below, with very few exceptions, are interchangeable.
Some settings might not apply to both, but the steps are similar. The TouchPad can be configured to interpret various gestures on its surface as different actions. For example, if the TouchPad has been configured to do so, a two-finger leftward swipe while browsing a website takes you to a previously viewed page; or, double-tapping the TouchPad while the cursor hovers over a text file opens the file in your default text editor.
You can adjust the sensitivity of the TouchPad, enable or disable the features and gestures, and change the functionality of the buttons. HP constantly improves its products and provides software updates. HP recommends periodically checking for software, drivers, and system BIOS updates to ensure you get the maximum functionality out of your notebook and TouchPad pointing device. To learn how to find the latest software and drivers, please see the section Updating the driver through Windows Update or the HP document Obtaining Software and Drivers.
Common TouchPad gestures The most commonly used TouchPad actions are gesture-based and provide shortcuts for quickly navigating in and working with windows and files.
Most TouchPad models and software can perform all the gestures listed. In some cases these features are disabled in the TouchPad software, and only need to be enabled or configured.
To rotate an image or portion of the screen, place two fingers on the TouchPad and then rotate them. TouchPad rotation only works in those applications that already have a rotate function, such as a photo browser. To drag-and-drop an item, tap the TouchPad twice to select the item, swipe your finger to move it, and then lift your finger to release it.
To scroll a window, a screen, or a list, place two fingers on the TouchPad, then swipe them from side to side or up and down. Lift your fingers to stop scrolling. To zoom-in or -out while working in a window, place two fingers on the TouchPad and move them outward to zoom-in and inward to zoom-out. TouchPad zooming only works in those applications that already have zoom functions, such as a photo browser or word processor.
You can also determine if the taskbar has a Touchpad icon and how it appears. In the Windows search box, type TouchPad. To determine if the icon for the Touchpad is displayed in the taskbar, and if it is, how it appears, make the appropriate selection under Tray Icon.
Use the following steps to open the properties page and enable or disable individual settings. If you have a Synaptics device, the tab includes the Synaptics icon and might vary from the graphic. You can adjust the TouchPad settings for scrolling, clicking, sensitivity, edge behaviors, and gesture actions to suit your personal preferences.
Not all notebooks use a Synaptics TouchPad or ClickPad; however, all touchpads have similar features and configuration options. The Properties window is divided into three areas to help you with TouchPad or ClickPad configuration.
The left side of the window lists gestures and actions. Click to highlight individual gesture or action. When highlighted, select the Help icon to find out more information or select the Settings icon to change the settings.
The lower right side shows the finger movement associated with the gesture or action. Turn on or off individual gestures by clicking on the checkbox next to each item. A checkmark in the checkbox indicates that gesture is enabled.
Button clicking using a TouchPad The TouchPad has dedicated left- and right-click buttons give you the same functionality as the buttons on an external pointing device. The ClickPad uses the lower left and lower right side of the pad as the left- and right-click buttons. You can also tap and drag an item in the same way as you click and hold the left button on an external pointing device to drag an item around the screen. Clicking and tapping are enabled and pre-configured by default.
Customize buttons TouchPad By default, the left and right buttons function as left-click and right-click buttons. You can customize button clicks from the TouchPad Properties page. Use the following steps to customize the buttons. Depending on your computer model and its configuration, the options in this section might be available.
If they are, the screens vary slightly. Click the Buttons tab. Under Button configuration you can make selections to customize the button functions.
Customize clicking You can customize actions for finger clicks from the ClickPad Properties page. Use the following steps to adjust and customize clicking. Click to highlight Clicking. If the checkbox next to Clicking does not contain a check mark, click the checkbox until a check mark displays to enable clicking. Clicking on the properties page. Click the Settings icon to adjust clicking settings. Customize one-finger, two-finger, three-finger, and corner click actions by clicking on the down icon to open the click action menu for each item.
Scroll through the menu to make your selection. Some selections required additional information. If the Configure button is enabled after your selection, click Configure and follow the instructions. Click the Close button to return to the properties screen. Click the Apply button to apply your changes, and then select OK to exit the properties screen.
Customize tapping gestures Single- and double-tap gestures mimic the single- and double-click behavior on an external pointing device. Use the following steps to adjust and customize tapping. Open the ClickPad Settings. Click to highlight Tapping. If the checkbox next to Tapping does not contain a check mark, click the checkbox until a check mark displays to enable tapping.
Tapping on the properties page. Click the Settings icon to adjust the tapping settings. You can make the following adjustments:. Tap and Drag - Adjusts how you use the TouchPad to drag items on the computer screen.
Scrolling using a ClickPad Dedicated horizontal and vertical scroll gestures allow you to scroll inside a program window. These are enabled and pre-configured by default. You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge.
Adjust single finger scrolling Use the following steps to adjust your TouchPad or ClickPad for single finger scrolling. Click to highlight Scrolling. If the checkbox next to Scrolling does not contain a check mark, click the checkbox until a check mark displays to enable scrolling. Scrolling on the properties page.
Click the Settings icon to adjust scrolling settings. Scrolling Speed - Adjusts the speed of scrolling. Set Scrolling Region - Adjusts the size of the scrolling region.
The scrolling region is defined by the cross-hatched area. Click and drag the small black squares to make the region larger or smaller. Enable vertical scrolling - Allows scrolling by sliding your finger up or down the left side of the TouchPad in the left side scrolling region. Enable horizontal scrolling - Allows scrolling by sliding your finger along the lower edge of the TouchPad in the lower scrolling region.
Synaptics Pointing Device Drivers Not Working on Windows 10 [Solved]
When I first switched on the laptop, one of the first things it did was to install several updates, one of which was for the touchpad v Now I find the touchpad has only much more basic functionality and its quite hard to control. But here's the next problem - Settings is unable to access the new updated touchpad software driver. If I persevere I get a message about the windows shell common dll having stopped working. Any ideas about how I go about gaining access to the settings - is it through windows settings, or is there another route? This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. If you say yes, then I suggest you to try removing that particular driver update to see if it makes any difference.
Synaptics Pointing Device Driver