Ricoh 5500 Printer Driver Latest

By serious p.

Ricoh 5500 Printer Driver Install Update

Other product names used herein are for identification purposes only and might be trademarks of their respective companies. Manuals for This Machine Refer to the manuals that are relevant to what you want to do with the machine. This manual provides an introduction to the functions of the machine. It also explains the control panel, preparation procedures for using the machine, how to enter text, and how to install the CD-ROMs provided. When a Message is Displayed Indicates important safety notes.

Ignoring these notes could result in serious injury or death. Be sure to read these notes. When the Machine Does Not Operate As wanted This chapter explains basic troubleshooting procedures that are applicable to all functions of this machine. Indicators This section explains Indicators displayed when the machine requires the user to remove misfed paper, add paper, or other perform other procedures.

Misfeed indicator Appears when a misfeed occurs. When the Machine Does Not Operate As wanted Panel Tone The following table explains the meaning of the various beep patterns that the machine produces to alert users about left originals and other machine condi- tions.

Beep pattern Meaning Cause Two long beeps. Then, follow the instructions displayed on the control panel. If other messages appear, follow the instructions displayed. The entered login user Inquire the user administrator for the name or login password correct login user name and login pass- is not correct.

The machine cannot per- Contact the administrator. On the file se- comes full. If this does not increase available memory, do the following. If you cannot execute a function, terminate any other functions currently active, and then try executing the function again. Troubleshooting When Using the Copy Function This chapter explains likely causes of and possible solutions for copier function problems.

When a Message Appears This section explains the machine's main messages. If other messages appear, follow the instructions they contain. Troubleshooting When Using the Copy Function Message Cause Solution The entered login user Inquire the user administrator for the Authentication name or login password correct login user name and login pass- has failed. Paper type or tray set- Make the same settings on both ma- Sub-machine does tings on the two ma- chines.

Problem Cause Solution Copies appear dirty. Image density is too high. Adjust the image density. Parts of images are not The correct paper size is Select the proper paper size. You cannot combine sev- Selected functions cannot Check the combination of functions eral functions. You can set the width between 0 - 30 nal image are not copied. Load paper in another tray. Cannot print in duplex You have loaded paper Change the paper.

Troubleshooting When Using the Printer Function This chapter explains likely causes of and possible solutions for printer function problems. When a Message Appears during Installation of the Printer Driver This section explains what to do if a message appears when installing the printer driver.

On the [Start] menu, point to [Settings], and then click [Printers]. Double-click the Add Printer icon. Follow the instructions in Add Printer Wizard. When a Message Appears When a Message Appears This section describes the principal messages that appear on the panel display.

If a message not described here appears, act according to the message. Alternatively, select list display has been ex- [Frame Priority] from [Memory Usage] in ceeded. Problem Cause Solution Printing does not start. The power is off. Check the cable is securely plugged into the power outlet and the machine. If the machine is operat- Check access point settings when in the ing in an extended wire- infrastructure mode.

Check if the print port setting is correct. Other Printing Problems Other Printing Problems This section explains likely causes of and possible solutions for problems that can occur when printing from a computer.

Problem Cause Solution Print is smudges. The paper is feeding Load the paper correctly. Other Printing Problems Problem Cause Solution There is considerable Processing time de- If the data-in lamp is blinking, data has been delay between the pends on data vol- received by the printer. Wait for a moment.

High volume Making the following setting on the printer and actual printing. High volume the [Print Quality] tab in the printer driver's and actual printing. Troubleshooting When Using the Scanner Function This chapter explains likely causes of and possible solutions for scanner function problems.

When Scanning is Not Done as Expected This section explains causes and remedies when scan results are not as expected. When Stored Files Cannot be Accessed This section explains likely causes of and possible solutions for job access-relat- ed problems. Problem Cause Solution Stored files cannot be Limits have been imposed using Contact the administrator. Troubleshooting When Using the Scanner Function When a Message is Displayed This section explains likely causes of and possible solutions for error messages that may appear on the machine's control panel.

When a Message is Displayed on the Control Panel This section explains causes and remedies if an error message appears on the display of the control panel. Reduce the number of the selected files. Troubleshooting When Using the Scanner Function Message Cause Solution The destination comput- Check whether the computer name and Cannot find the er name or folder name is the folder name for the destination are specified path.

Please check the settings. Troubleshooting When Using the Scanner Function Message Cause Solution Too many jobs are in Retry sending after sending jobs in Output buffer is standby state, and send- standby state completes. Sending the ing was cancelled. Please try again later. When a Message is Displayed Message Cause Solution The entered login user Check the login user name and login Authentication name or login password password.

The machine is unable to au- has failed. The entered path format Confirm the destination computer and The entered path is incorrect. Load specified paper tray. The scanned original ex- Specify the scan size and resolution Exceeded max.

For in- formation about how to turn off the main power switch, see About This Ma- chine. Scanner is not function cannot be used available on the on this machine. Scanner is not power switch is off. The problem may be due to the follow- ing cause: A function of the machine Wait for a while and reconnect. Adding Paper, Toner and Staples This chapter explains troubleshooting procedures that are applicable to all the machine's functions. Loading Paper This section explains what to do when paper runs out and needs reloading.

Adding Paper, Toner and Staples Carefully pull out the paper tray until it stops. ANSS Square the paper and place it print side down. The LCT is identified as Tray 4. The key blinks while the bottom plate is moving down. Loading Paper in the Interposer The following procedure explains loading paper into the interposer. Adding Paper, Toner and Staples Load paper orderly. AMSS Adjust the side fence to the paper size. Loading Paper Orientation-Fixed Paper or Two-Sided Paper The following describes paper with its orientation and printing surface specified letterhead paper.

Orientation-fixed top to bottom or two-sided paper for example, letterhead paper, punched paper, or copied paper might not print correctly, depending on how the originals and paper are placed. Procedures for changing the paper size differ depending on the tray tray 1 or other optional paper tray units. Make sure you are following the appropriate procedure before you begin. Changing the Paper Size Release the lock on the side fence. ANSS While pressing down the release lever, slide the side fence until they are aligned the paper size you want to load.

ANSS Slide the end fence until it is aligned with the size of paper to you want to load. Adding Paper, Toner and Staples Square the paper and load it print side up.

Re-lock the side fence again. ANSS Carefully slide the paper tray fully in. Check the size on the display. Changing the Paper Size Changing to a Size that is Not Automatically Detected If you load a paper size that is not selected automatically, you need to specify the paper size with the control panel. Adding Paper, Toner and Staples Select the tray for which you want to change the paper settings.

Press either of [Tray Paper Size: Tray 2] to [Tray Paper Size:

Ricoh 5500 Printer Driver

Ricoh Aficio MP 5500 S/P Operating Instructions Manual

First I would suggest that you check if the service related to the printer is running on the computer. A print spooler is service that temporarily stores print jobs on the computer hard disk or in memory until the printer is ready to print them. If you've been waiting an unusually long time for a document to print, or if you see an error message about the print spooler, spooler subsystem, or spooler resources, you might need to change and then restart the Print Spooler service on your computer. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. Right-click the Print Spooler service , and then click Properties. On the General tab, next to Startup type , make sure that Automatic is selected. If the service is not already running, under Service status , click Start , and then click OK. Make sure network discovery and printer sharing are on by following these steps: If network discovery is off , click the arrow button to expand the section, click Turn on network discovery , and then click Apply. If file sharing is off, click the arrow button to expand the section, click Turn on file sharing , and then click Apply.

Ricoh Aficio MP 5500 Drivers

Ricoh 5500 Printer Driver

Other product names used herein are for identification purposes only and might be trademarks of their respective companies. Manuals for This Machine Refer to the manuals that are relevant to what you want to do with the machine. This manual provides an introduction to the functions of the machine. It also explains the control panel, preparation procedures for using the machine, how to enter text, and how to install the CD-ROMs provided. When a Message is Displayed Indicates important safety notes. Ignoring these notes could result in serious injury or death. Be sure to read these notes. When the Machine Does Not Operate As wanted This chapter explains basic troubleshooting procedures that are applicable to all functions of this machine. Indicators This section explains Indicators displayed when the machine requires the user to remove misfed paper, add paper, or other perform other procedures. Misfeed indicator Appears when a misfeed occurs.

0 thoughts on “Ricoh 5500 Printer Driver

Leave a Reply

Your email address will not be published. Required fields are marked *